Grade 4 titanium is the strongest commercially pure (CP) grade: 550 MPa (80 ksi) minimum tensile strength and 483 MPa (70 ksi) minimum yield, with the highest iron and oxygen limits of the CP grades.
Get price and availability for Grade 4 Titanium: bar sheet plate
Chemical composition
Limits for Grade 4 Titanium (UNS R50700) in weight percent: maximums unless shown as a range. Source: ASTM B348 (bar), ASTM B265 (sheet/plate).
| Element | Limit (wt %) |
|---|---|
| Nitrogen (N) | 0.05 |
| Carbon (C) | 0.08 |
| Hydrogen (H) | 0.015 |
| Iron (Fe) | 0.50 |
| Oxygen (O) | 0.40 |
| Other elements | 0.1 each / 0.4 total |
| Titanium (Ti) | Balance |
Mechanical properties
Specified minimum properties for annealed Grade 4 Titanium at room temperature. Source: ASTM B348 (bar), ASTM B265 (sheet/plate). The values for your material are on its mill test certificate.
| Property | Value |
|---|---|
| Ultimate Tensile Strength (min) | 550 MPa (80 ksi) |
| Yield Strength (0.2%, min) | 483 MPa (70 ksi) |
| Elongation (min) | 15 % |
- Minimum properties per ASTM B348 apply to bar up to 3 in (76 mm); larger sections are by agreement.
- Minimum properties per ASTM B265 apply to plate up to 1 in (25 mm) thick; thicker plate is by agreement.
- Density is a typical value, not a specification requirement.
Grade 4 Titanium at a glance
| Supplied by Laube as | Bar, Sheet, Plate |
|---|---|
| ASTM standards | ASTM B348 (bar), ASTM B265 (sheet/plate) |
| Notes | Highest strength of the CP grades. Corrosion resistant. Lower formability than Grades 1–3. |
| Typical uses | Surgical implants, airframe components, cryogenic vessels |
| Compare | All grades chart |
| Industry pages | Medical & Orthopedic, Aerospace |
Frequently Asked Questions
Is Grade 4 the strongest commercially pure titanium?
Yes. Of the CP Grades 1–4, Grade 4 has the highest minimum tensile strength: 550 MPa (80 ksi) under ASTM B348 and B265.